Leading Manufacturers, Exporters, Wholesaler, Trader and Distributor of 20 HP Belt Driven Screw Compressor, 20 HP Laser Machine Air Compressor, 500 Liter Mild Steel Vacuum Tank, Air Cooled Chiller, Air Receiver Tank, Booster Compressor, Compressor Air Line Filter, Dental Oil Free Air Compressor, Heatless Air Dryer, Mining Air Compressor, Oil Free Compressors, Refrigerated Air Dryers, Vacuum Pumps, Water Chilling Machine and Water Cooling Towers from Ahmedabad.
We are manufacturing a wide range of air chiller that is widely suitable for its high operational efficiency. Our air chillers are designed to cool both the process as well as the process machine. Using an air chiller to remove heat from the process involves an evaporator to remove the heat and an air cooled condenser to remove the heat from the evaporator. In a typical plant layout, the evaporator and condenser are inside the chiller unit.
Features
High quality components and robust design.
Factory built and tested for quality check.
User friendly micro-processor based control panel.
Chillers are fully automatic with high quality controls.
Quick chilling is ensured with plate type and shell and tube evaporators.
We are among the pioneers in the industry for manufacturing and supplying ASME Receiver Tanks, We are the best Air Receiver Tank Manufacturer in Ahmedabad. The offered tanks are made in tune with the industry standards and have earned us loads of profits. These tanks are robust in terms of construction, durable, leak proof, non-corrosive and ideal for automobile and electrical industries. Being resistant to wear and tear, it is extensively demanded.
Features
Non corrosive
Seamless finish
Long service life
Dimensionally accurate
Durable
Specifications
Capacity: From 45 Ltrs. (0.045 M3) to 20000 Ltr. (20 M3)
An air booster utilizes a small volume of air existing plant air and increase it to your high pressure requirement. Our Booster produce high air pressure with less horsepower, less initial cost and are smaller than stand alone compressors. Our air boosters are easier to install and increase your energy efficiency. Booster compressors are on ideal choice for PET bottling applications whereas high pressure compressed air is required. This machine wide range of booster compressors that are able to boost the compressed air from a screw compressor (inlet pressure 8, 10, 13 bar) up to 40 bar.
• CFM : 60 CFM TO 500 CFM • Pressure : 20 to 40 BAR (Max.) Option available with suction air from screw
Specifications MOC Housing-Aluminium Pressure Die Cast MOC Filter- Glass Fibre Media with SS core and SS Support Max Working Pressure-12 bar Hydro Tested- 20 bar Micron Rating - 5 Micron, 0.1 Micron, 0.01 Micron, 0.03 Micron Oil Removing Drain- Manual Ball Valve
A dental air compressor pressurizes atmospheric air for use in dental procedures. After capture and compressing oxygen, it cleans and dries the gas and stores it away to be used for handsets, drills, and other types of units that need out ultra-clean compressed air to function. Air is also used to dry the tooth surface, when bonding composites for example. Some units are portable, allowing practitioners to move them around as needed.
Specifications
We have 1hp to 10hp 1cfm to 36 cfm up to 8 bar pressure range oil free salient air compressors., Used in Medical and Surgical Hospitals, Foods, Pharmaceuticals, Chemicals, laboratories instruments operations. We Heavy Duty Oil air compressor Specially Designed for Hospital’s Various Applications, this machine widely used in medical and surgical operations area & other small laboratories machinery operations.
A compressed air dryer is a device for removing water vapor from compressed air. Compressed air dryers are commonly found in a wide range of industrial and commercial facilities. The process of air compression concentrates atmospheric contaminants, including water vapor. This raises the dew point of the compressed air relative to free atmospheric air and leads to condensation within pipes as the compressed air cools downstream of the compressor.
Features
Compact & Innovative Design
Non-cyclic Operation
Constant Dew Point
Eco Friendly
Customized air/Water Cooled Models
Easy in installation & Operation
Low maintenance & Easy to Service
Load Handling Capacity and Easy to Service
Special Handling Capacity 0 to 100% without Freezing
Special Control for Constant Evaporating and Comdensing temperature
A dental air compressor pressurizes atmospheric air for use in dental procedures. After capture and compressing oxygen, it cleans and dries the gas and stores it away to be used for handsets, drills, and other types of units that need out ultra-clean compressed air to function. Air is also used to dry the tooth surface, when bonding composites for example. Some units are portable, allowing practitioners to move them around as needed.
Specifications
We have 1hp to 10hp 1cfm to 36 cfm up to 8 bar pressure range oil free salient air compressors., Used in Medical and Surgical Hospitals, Foods, Pharmaceuticals, Chemicals, laboratories instruments operations. We Heavy Duty Oil air compressor Specially Designed for Hospital’s Various Applications, this machine widely used in medical and surgical operations area & other small laboratories machinery operations.
The basic theory of operation compressed Air enters to the Air to Air heat exchanger, where it is pre cooled by outgoing cold dry air. Highly effective pre cooler reduces the temperature considerably, and enables to use smaller & economical refrigeration system. Then the pre cooled, relatively low temperature compressed air enters to Air to Refrigerant heat exchanger, where it is cooled down to +3 ? (Pressure Dew point). At this temperature, moisture in vapor from condensed to liquid form, and separated from the compressed air by moisture separator and discharged to drain port through automatic drain valve. The cold dry compressed air passes back to Air Heat exchanger, and gain temperature by exchanging heat with incoming warm air. The dry air coming out from the dryer is ready to use for instrumentation and process air applications.
Features
Eco friendly refrigerant.
Constant dew point at all varying load.
Lower power consumption
Built with necessary protectors for electrical and refrigeration systems.
Vacuum Pumps are the number one choice for demanding applications. Providing top operating efficiency combined with low maintenance. And best of all. these vacuum pumps are backed by Real Air Compressor. the world's leader in Air compressor and pump manufacturing.
Features
Separately cast cylinders with deep fins for improved cooling and efficiency
100% cast iron frame and cylinders for durability and long life
Easily accessible stainless steel valve and one piece connecting rod improves serviceability and reduces the cost of maintenance
Low oil level switch standard on all packages to prevent the compressor from potential damages due to low oil level.
We manufacture water chilling plants with nominal cooling capacity for Plastic products Industries. The system of water chilling plant is to deliver chilled water to the end user.
Features
Emerson climate Technologies/Danfoss make compressor.
Available Hermetic Compressor or scroll Compressor.
Air cooled type condenssor with Axial Fan.
Shell and tube or Copper pipe type cooling Unit
Schneider make Electrical components.
Digital temprature Controller.
Stainless stell with Insullation water Tank.(Avialable- 2TR, 3TR, 5TR, 10TR)
A-One International square/Round type cooling towers work on the principle of counter flow. This means that the water flows down while the air is pulled upwards by a fan. As the water flows further through the system, the air encounters is fresher, in other words cooler and less saturated with moisture. Direct access to internal parts providing easy maintenance and repairs, which is negligible. All materials in making A-One International cooling tower are completely resistance to corrosion and chemicals. It is light in weight and thus permits roof installation without any special reinforcement. A direct driven axial flow fan ensures the system free from problem faced with belt and gear drives.
Features
Less Noise Occure During Operation Of Cooling Tower Low Energy Consumption .
Designed To Give Optimum Cooling Performance.
Inbuilt Frp Legs For Casing Increase Life Of Cooling Tower Against Rusting.
Frp Louvers Inlets For Eleminates Water Splashing And Easy To Clean Basin Or Resist Against Outer Opjects.
Our Product is Economical And Aproved Inducued Draught Design.
It Iworks In Almost Every Industry And Still Favorite For Last 40 Years.Compact Modular Design Needs Very Less Space To Operat And Maintain It.
View
